Glass Prisms for Airfield and Inset Lighting
ECOGLASS is a long-term manufacturer and supplier of glass prisms for airfield, heliport and other inset lighting applications. Our prisms are designed for projects where light needs to be controlled reliably in demanding operating environments while maintaining precise shape, glass quality and the function of the entire lighting system.
Over the years, we have produced hundreds of different prism shapes and sizes. Thanks to this experience, we can respond to specific technical requirements and deliver glass components for new projects, service purposes and special lighting applications.
ECOGLASS is a long-term manufacturer and supplier of glass prisms for airfield, heliport and other inset lighting applications. Our prisms are designed for projects where light needs to be controlled reliably in demanding operating environments while maintaining precise shape, glass quality and the function of the entire lighting system.
Over the years, we have produced hundreds of different prism shapes and sizes. Thanks to this experience, we can respond to specific technical requirements and deliver glass components for new projects, service purposes and special lighting applications.
Prisms for Airfield and Heliport Lighting
ECOGLASS glass prisms are mainly used in airfield and heliport lighting. They can be part of runway lights, taxiway light, ground lighting or other technical lighting elements where precise light direction and guidance are required.
In these applications, optical function is not the only important factor. Durability, production repeatability and the ability to deliver the component in the required shape and size are also essential. Each project is therefore assessed according to its specific use and technical requirements.
Light Prisms for Inset and In-Ground Lighting
In addition to airfield lighting, prisms can also be used in other inset and in-ground lighting components. Typical examples include lights installed in the ground, technical lights used in transport infrastructure, pedestrian crossing, tunnels, parking garages or other applications where the optical component is part of a durable lighting module. You can read more about a dedicated safety signal light for pedestrian crossing installed in Liberec town here.
In these projects, the glass prism must match the construction of the entire light and guide the light correctly within the given space. The final shape therefore always depends on the requirements of the specific system.
Prisms for Airfield and Heliport Lighting
ECOGLASS glass prisms are mainly used in airfield and heliport lighting. They can be part of runway lights, taxiway light, ground lighting or other technical lighting elements where precise light direction and guidance are required.
In these applications, optical function is not the only important factor. Durability, production repeatability and the ability to deliver the component in the required shape and size are also essential. Each project is therefore assessed according to its specific use and technical requirements.
Light Prisms for Inset and In-Ground Lighting
In addition to airfield lighting, prisms can also be used in other inset and in-ground lighting components. Typical examples include lights installed in the ground, technical lights used in transport infrastructure, pedestrian crossing, tunnels, parking garages or other applications where the optical component is part of a durable lighting module. You can read more about a dedicated safety signal light for pedestrian crossing installed in Liberec town here.
In these projects, the glass prism must match the construction of the entire light and guide the light correctly within the given space. The final shape therefore always depends on the requirements of the specific system.
These Are Not Dispersion Optical Prisms
When selecting the right type of prism, it is important to distinguish what product is being discussed. ECOGLASS prisms are not classic laboratory or precision-ground optical prisms used for light dispersion, beam splitting or redirecting a light beam in the way commonly known from physics.
Our prisms are glass lighting components developed and manufactured for specific types of lighting. Their main purpose is to work with light inside an inset lighting system, for example in airfield, heliport or transport lighting.
These Are Not Dispersion Optical Prisms
When selecting the right type of prism, it is important to distinguish what product is being discussed. ECOGLASS prisms are not classic laboratory or precision-ground optical prisms used for light dispersion, beam splitting or redirecting a light beam in the way commonly known from physics.
Our prisms are glass lighting components developed and manufactured for specific types of lighting. Their main purpose is to work with light inside an inset lighting system, for example in airfield, heliport or transport lighting.
Hundreds of Shapes and Sizes According to Technical Requirements
During our long production history, we have manufactured hundreds of different shapes ans sizes of glass prisms. Each project may have different requirements for geometry, dimensions, installation within the lighting module or final light behaviour.
Thanks to our experience with pressed glass components, we can design and manufacture prisms according to the customer´s specific requirements. If needed, the process can also include technical consultation, optical design or additional inspection of the final component.
Pressed Glass for Demanding Lighting Applications
Glass prisms for airfield, inset and in-round lighting must meet high requirements for shape, surface quality and material stability. Precisely pressed glass is suitable for applications where long-term reliability and repeatable optical function are important.
During design and production, it is necessary to consider not only the shape of the prism itself, but also its integration into the complete lighting system.
The final component must correspord to the application requirements, luminaire construction and the conditions in which it will be used.
Hundreds of Shapes and Sizes According to Technical Requirements
During our long production history, we have manufactured hundreds of different shapes ans sizes of glass prisms. Each project may have different requirements for geometry, dimensions, installation within the lighting module or final light behaviour.
Thanks to our experience with pressed glass components, we can design and manufacture prisms according to the customer´s specific requirements. If needed, the process can also include technical consultation, optical design or additional inspection of the final component.
Pressed Glass for Demanding Lighting Applications
Glass prisms for airfield, inset and in-round lighting must meet high requirements for shape, surface quality and material stability. Precisely pressed glass is suitable for applications where long-term reliability and repeatable optical function are important.
During design and production, it is necessary to consider not only the shape of the prism itself, but also its integration into the complete lighting system.
The final component must correspord to the application requirements, luminaire construction and the conditions in which it will be used.
Custom Prism Development
If a standard shape does not meet the project requirements, custom prism development can be considered. ECOGLASS can help customers with the design of the optical component, assessment of manufacturing possibilities and preparation of a solution for a specific lighting application.
Custom development is especially suitable for projects where a specific lighting function must be achieved, the prism needs to match the construction of the light, or the solution must connect to an existing technical system.
ECOGLASS can help with reconstruction of existing prisms using reverse engineering when technical documentation is incomplete or missing.
Custom Prism Development
If a standard shape does not meet the project requirements, custom prism development can be considered. ECOGLASS can help customers with the design of the optical component, assessment of manufacturing possibilities and preparation of a solution for a specific lighting application.
Custom development is especially suitable for projects where a specific lighting function must be achieved, the prism needs to match the construction of the light, or the solution must connect to an existing technical system.
ECOGLASS can help with reconstruction of existing prisms using reverse engineering when technical documentation is incomplete or missing.
Who ECOGLASS Prisms Are Suitable For
ECOGLASS glass prisms are suitable for manufacturers of airfield and heliport lighting, suppliers of transport infrastructure, development teams, manufacturers of technical lights and companies that need a glass component for inset lighting applications.
The product is also suitable for customers looking for a replacement for an existing part, an adjustment of an original solution or the development of a new prism according to custom requirements.
What to Provide When Requesting a Prism
For faster project assessment, it is helpful to provide technical requirements, a drawing, a 3D model, a sample of the original part or information about the prism´s use in the lighting system. Important details include the required size, shape, installation method and final optical function.
If documentation is not available, the process can start with a consultation based on a physical sample or a description of the application. Depending on the situation, this can also be followed by 3D scanning, reverse engineering or the design of a new optical component.
Who ECOGLASS Prisms Are Suitable For
ECOGLASS glass prisms are suitable for manufacturers of airfield and heliport lighting, suppliers of transport infrastructure, development teams, manufacturers of technical lights and companies that need a glass component for inset lighting applications.
The product is also suitable for customers looking for a replacement for an existing part, an adjustment of an original solution or the development of a new prism according to custom requirements.
What to Provide When Requesting a Prism
For faster project assessment, it is helpful to provide technical requirements, a drawing, a 3D model, a sample of the original part or information about the prism´s use in the lighting system. Important details include the required size, shape, installation method and final optical function.
If documentation is not available, the process can start with a consultation based on a physical sample or a description of the application. Depending on the situation, this can also be followed by 3D scanning, reverse engineering or the design of a new optical component.
Frequently Asked About Glass Prisms
What are ECOGLASS prisms used for?
ECOGLASS prisms are mainly used as glass lighting components for airfield, heliport and inset lighting. They can be part of runway lights, pedestrian crossings, tunnels or other technical applications.
Are these prisms the same as beam splitters?
No. ECOGLASS prisms are not classic dispersion optical prisms or beam splitters. They are glass components intended for specific lighting applications.
Can a prism be manufactured accordign to custom requirements?
Yes. ECOGLASS has experience with manufacturing hundreds of different prism shapes and sizes. Each solution is assessed according to the technical requirements and the application.
What documents or inputs are suitable for an inquiry?
Ideally, you should provide a drawing, 3D model, sample of the original part or information about the prism´s use in the lighting system. If these materials are not available, the process can start with a consultation based on project requirements.
Can the function of the manufactured prism be verified?
Yes. Depending on the project, optical simulation, photometric measurement, shape inspection or other technical verification can be used.
Frequently Asked About Glass Prisms
What are ECOGLASS prisms used for?
ECOGLASS prisms are mainly used as glass lighting components for airfield, heliport and inset lighting. They can be part of runway lights, pedestrian crossings, tunnels or other technical applications.
Are these prisms the same as beam splitters?
No. ECOGLASS prisms are not classic dispersion optical prisms or beam splitters. They are glass components intended for specific lighting applications.
Can a prism be manufactured accordign to custom requirements?
Yes. ECOGLASS has experience with manufacturing hundreds of different prism shapes and sizes. Each solution is assessed according to the technical requirements and the application.
What documents or inputs are suitable for an inquiry?
Ideally, you should provide a drawing, 3D model, sample of the original part or information about the prism´s use in the lighting system. If these materials are not available, the process can start with a consultation based on project requirements.
Can the function of the manufactured prism be verified?
Yes. Depending on the project, optical simulation, photometric measurement, shape inspection or other technical verification can be used.
Are You Looking for a Glass Prism for Airfield or Inset Lighting?
Send us your technical requirements, drawing, 3D model or sample of the original part. We will assess the manufacturing possibilities and recommend the next steps according to the specific application, required shape and prism function.
We will be happy to discuss whether it is better to work from an existing solution, modify the original component or design a new custom glass prism.
Are You Looking for a Glass Prism for Airfield or Inset Lighting?
Send us your technical requirements, drawing, 3D model or sample of the original part. We will assess the manufacturing possibilities and recommend the next steps according to the specific application, required shape and prism function.
We will be happy to discuss whether it is better to work from an existing solution, modify the original component or design a new custom glass prism.